A new XROS is on the way – the Vaporesso XROS Pro!

The XROS range have been very popular from the XROS and XROS Mini, through the XROS Nano, XROS 2, XROS 3, XROS 3 Mini up to the XROS 3 Nano.

What To Expect From The Vaporesso XROS Pro…

As this has “Pro” in the name – you can expect some additional technology!

For some reason, Vaporesso have changed the layout on their product pages, which does not give as much information as previously.

Anyway to get stuck in, you get a 1200mAh battery which is charged at a 2A charge rate via the USB Type C port in around 35 minutes!

The output is specified as 30W maximum. As this has a Variable Wattage system, you can adjust the output to suit the pod installed. However I am a bit confused as it appears the wattage adjustment is only compatible with the 0.4ohm pods. If using other resistance pods you will be able to adjust “ECO/Normal/Power mode instead of wattage level”?

Inside the mod is the AXON chipset, often found on larger Vaporesso kits. This provides a “Super Pulse Mode” regulation, which basically means the output “pulses” to keep it stable and consistent regardless of battery charge status.

This is equipped with a screen but the size and type is not specified. The single button allows for all adjustments required.

Also there is a RGB LED indicator located below the screen.

You can manually press the fire button to fire or use the auto draw system by inhaling on the mouthpiece.

One of the features that Vaporesso boast about for the XROS Pro, is the sliding lock switch on the side of the mod. You can still use the auto draw firing when the device is locked.

On the read of the device is an airflow adjustment slider to tailor the incoming airflow to your preference.

Now when it comes to pods – you will see how super compatible this is.

Included in the kit are two of the new 0.4ohm XROS pods. These have the COREX flavour technology which should improve flavour and pod lifespan. The coils are fixed so you will discard the pod when the coil performance deteriorates.

Also this is compatible with all of the previous XROS pods – there are a lot of them.

The standard capacity is 3ml, but there are 2ml TPD and 2ml CRC (Child Resistant Container) versions available to meet regulations in different countries.

Here is an introduction video from the Vaporesso_EU YouTube channel.

There are 7 colours to choose from: Black, Silver, Blue, Red, Green, Orange and Pink.

Kit Includes

• Vaporesso XROS Pro device
• 2x XROS 0.4ohm Mesh Pod
• USB Type C cable
• User manual

Vaporesso XROS Pro Specs

• Size: 24.4×18.4×119.7mm
• Battery: 1200mAh (internal)
• Display: Screen (Size and Type not specified), RGB LED indicator
• Output: up to 30W
• User modes: Variable wattage (for 0.4ohm pod) / ECO, Normal, Power modes for all other pods
• Type C USB charging – 2A charge rate – 35 minute charge time
• Resistance range: Not specified
• Capacity: 3ml (Standard) / 2ml (TPD) / 2ml (CRC)
• Pods: XROS series
• Compatible with: All XROS pods
• Auto draw or manual fire
• Adjustable airflow
• Slide lock button
• Top fill port
• AXON Super Pulse Mode
• COREX Coil Technology

Phew there is a lot of technology in this, yet it still retains the compatibility with the previous XROS pods – making it great for an upgrade!

Let me know what you think of the Vaporesso XROS Pro in the comments below!

The post Vaporesso XROS Pro Preview – More Tech, Same Compatibility! appeared first on Ecigclick.