Change Language
wds-media
  • Home
  • VPN
How to fix the “Ethernet does not have a valid IP configuration” error

How to fix the “Ethernet does not have a valid IP configuration” error


“Ethernet does not have a valid IP configuration” — have you ever encountered this error? It’s a
common issue that many users experience, and it prevents them from accessing the web. But what
is an IP configuration? And how can you fix it?

<br /> What does the “Ethernet does not have a valid IP configuration” error mean?<br />

The “Ethernet does not have a valid IP configuration” error means that Windows can’t receive the{‘ ‘} IP address from the DHCP (Dynamic Host
Configuration Protocol), which automatically assigns IP addresses to devices connected to the
network.


Your computer needs an IP address to connect to the internet and communicate with the outside
world. It’s similar to your home address. If a postal worker doesn’t know where you live, they
can’t deliver your mail. Likewise, without a valid IP configuration, the internet can’t send you
data.


There could be several reasons for this error: incorrect network configurations, outdated
drivers, or something else. However, this is not a serious issue and can be solved even with
limited technical knowledge. Just follow these steps to get back online.

Ways to fix the “Ethernet does not have a valid IP configuration” error

Let’s look at what options you have to solve the “Ethernet does not have a valid IP
configuration” error:

Restart your router

Turning your router on and off can work miracles. While this might seem a trivial solution,
restarting your router usually solves nine out of 10 internet connectivity issues. When you turn
off your router, make sure to count until 10 before turning it on. Additionally, you can also
restart your PC.

Restart the network adapter

If the problem persists, you can reset the network adapter and refresh your IP configuration:
Go to “Settings,” then hit “Network and internet,” and head to “Status.” Networks and Internet Under the “Advanced network settings” section, click “Change adapter options.” Click Change adapter options Right-click the adapter and select “Disable.” Select Disable Right-click the adapter again and select “Enable.” Configure your network adapter settings

Your device obtains an IP address automatically, but it’s worth checking if your settings are
correct:
Go to “Control panel,” press on “Network and sharing center,” and then head to “Change adapter
settings.”
Change adapter settings Right-click on the Ethernet and select “Properties.” Select Properties Double-click on “Internet Protocol Version 4 ( TCP/IPv4).” Double-click on Internet Protocol Version 4 Click on the “Obtain an IP address automatically” radio button. Click on the radio button Click on the “Obtain DNS server address automatically” radio button. Click “OK.”

You can also change your default settings manually and see if it helps to connect to the
internet:


IP address: 192.168.1.15


Subnet mask: 255.255.255.0


Default gateway: 192.168.1.1


Preferred DNS server: 8.8.8.8*


Alternate DNS server: 8.8.4.4 address.


*In this example, I’m using Google’s DNS server. Learn how to choose a secure DNS server and
select it in our article on{‘ ‘} how to change your DNS server.

{SHORTCODES.blogRelatedArticles}
Clear the network cache
Follow the instructions to clear the network cache: Type “cmd” in the Windows search bar and open “Command prompt.” Type cmd Type “ipconfig/flushdns” and hit “Enter.” flush DNS Type “ipconfig/release” and hit “Enter.” Type “ipconfig/renew” and hit “Enter.” This will clear your DNS cache on Windows, release your IP address, and renew it.

Troubleshoot Windows

Windows can identify connectivity issues and fix all kinds of problems. It doesn’t always help,
but it’s not a bad idea to try:
Go to “Settings,” hit “Network and internet,” and press “Status.” Networks and Internet Under the “Advanced network settings” section, click the “Change adapter options.” Click Change adapter options Right-click on the adapter and select “Diagnose.” Click Diagnose

Update ethernet network adapter drivers
Outdated ethernet network adapter drivers may be the cause of the error: Type “Device manager” in the Windows search bar. Type Device Manager Expand the “Network adapters” section. Right-click on the selected driver you want to update. Select “Update driver.” Update driver
If you have tried all the options mentioned above and still bump into the “Ethernet does not
have a valid IP configuration” error, contact your internet service provider (ISP) directly for
technical support.

How to prevent ISPs and other parties from spying on you

Your IP address links your online activities with your identity and location. The websites you
visit, the services you use, your location history, search queries, and other sensitive
information is all accessible to your ISP and other third parties.


This data is used to create a detailed profile of your habits, so companies can target you with
online advertisements. If you want to avoid this and keep your information to yourself — use a
VPN. A virtual private network hides your IP address and encrypts traffic, so nobody can see
what you do on the internet.

NordVPN has more than{‘ ‘} 5,500 servers in 60 countries, allowing you to
hop between them and protect your data. Robust{‘ ‘} VPN functions benefit all kind of users
and improve digital security. Our{‘ ‘} obfuscated servers can also
help you bypass online censorship in restrictive regimes.


With one NordVPN account, you can{‘ ‘} protect up to six devices

: laptops, smartphones, tablets, Android TVs, routers, and more. Protect your privacy today with
the tap of a button.

Stocks Under 10 Based on Deep Learning: Returns up to 31.24% in 14 Days

Stocks Under 10 Based on Deep Learning: Returns up to 31.24% in 14 Days

Read More